0

hi ,請問目前arduino SDK 1.07 有支援  RTL8711AF的chip嗎?

我從boards manager上 ameba SDK的資訊上面有提到

Boards included in this package:

Ameba 8195AM, Ameba 8711AM, Ameba 8711AF

,但是用Sketch 燒入程式後,無法正常開機,並且顯示的訊息還是在RTL8195A硬體,還是需要做甚麼設定嗎?

RTL8711AF的Log 訊息如下:

<RTL8195A><CR>
=========================================================<LF><CR>
<LF><CR>
<CR>
ROM Version: 0.3<LF><CR>
<LF><CR>
<CR>
Build ToolChain Version: gcc version 4.8.3 (Realtek ASDK-4.8.3p1 Build 2003) <LF><CR>
<LF><CR>
<CR>
=========================================================<LF><CR>
<CR>
Check boot type form eFuse<LF><CR>
<CR>
SPI Initial<LF><CR>
<CR>
Image1 length: 0x36cc, Image Addr: 0x10000bc8<LF><CR>

4/12/2016 10:45:26.200 [RX] - <CR>
Image1 Validate OK, Going jump to Image1<LF><CR>
<CR>
===== Enter Image 1 ====<CR><LF>
<CR><LF>
<CR>
<CR>
load NEW fw 0<LF><CR>
<CR>
<CR>
Flash Image2:Addr 0xb000, Len 213744, Load to SRAM 0x10006000<LF><CR>
<CR>
Image3 length: 0xe430, Image3 Addr: 0x30000000<LF><CR>

williamlai 回答了