hello to all,
because of incorrect upgrading ota file rt8710 is now unusable for me..
how can i set image 1(default image) to run via hardware?
yes, at boot time i see this below texts,but the latest line encountered an error and any at commands can not be executed...
i think that if i can force the rtl8710 to boot from image 1 it will be work..
because that entering to image 2 at boot time..
ROM Version: 0.3
Build ToolChain Version: gcc version 4.8.3 (Realtek ASDK-4.8.3p1 Build 2003)
Check boot type form eFuse
Image1 length: 0x3704, Image Addr: 0x10000bc8
Image1 Validate OK, Going jump to Image1
===== Enter Image 1 ====
load NEW fw 1
Flash Image2:Addr 0x80000, Len 271248, Load to SRAM 0x10006000
Img2 Sign: RTKWin, InfaStart @ 0x10006079
===== Enter Image 2 ====
#interface 1 is initialized
interface 0 is initialized
Initializing WIFI ...
Start LOG SERVICE MODE
init_thread(53), Available heap 0xc840
[UART Err]serial_init Err!
Is there any messages show on terminal at boot time?