I am newbie in RTL WiFi modules, sorry if question is very naive.
I can see two types of WiFi, one with slower MCU (RTL8710) and the other with faster MCU (RTL8195). Meanwhile I can just find one SDK. Could you please kindly let me know for which WiFi module I can use this SDK? If I can use for both, do I need any change in linker, MCU type or something else?
We got our RTL8195 EVB today. The log message has been copied bellow. Please kindly help me to find out the right SDK and a right path to speed up our development procedure.
FYI, we prefer to use Keil or IAR IDE to run the SDK. In our office we have a licensed version of IAR 7.4 but it seems your SDK on IAR is built with very new version of IAR. Am I right? Besides we use J-Link to flash the ARM cortex.
ROM Version: 0.3
Build ToolChain Version: gcc version 4.8.3 (Realtek ASDK-4.8.3p1 Build 2003)
Check boot type form eFuse
Image1 length: 0x3a80, Image Addr: 0x10000bc8
Image1 Validate OK, Going jump to Image1
BOOT from Flash:YES
===== Enter Image 1 ====
SDR Controller Init
load OLD fw 0
Flash Image2:Addr 0xb000, Len 258432, Load to SRAM 0x10006000
Img2 Sign: RTKWin, InfaStart @ 0x10006079
===== Enter Image 2 ====
#interface 1 is initialized
interface 0 is initialized
Initializing WIFI ...
Start LOG SERVICE MODE
init_thread(53), Available heap 0xd168
For RTL8195 EVB , you can download the latest version of SDK from AmebaIOT website.
and you also need to patch IAR 7.4 (version > 7.3)
Our company just yesterday has put an order for RTL8195 and I haven't got it yet. So I get back to you when get the EVB and give you the boot log?
Thank you for your feedback. Could you please provide me your Ameba boot log? We need to check MCU types and firmware version for your situation.