0

使用8711AF的EVBoard, 跟着文档配置好Uart Adapter.

然后使用Download and Debug,这时候Uart Adapter会像手册里面提到的那样出现下面的log。

ROM Version: 0.3

Build ToolChain Version: gcc version 4.8.3 (Realtek ASDK-4.8.3p1 Build 2003)

=========================================================

ROM Version: 0.3

Build ToolChain Version: gcc version 4.8.3 (Realtek ASDK-4.8.3p1 Build 2003)

=========================================================
Check boot type form eFuse
SPI Initial
Image1 length: 0x36e8, Image Addr: 0x10000bc8
Image1 Validate OK, Going jump to Image1
===== Enter Image 1 ====

load NEW fw 0
Flash Image2:Addr 0xb000, Len 285128, Load to SRAM 0x10006000
Image3 length: 0x5b80, Image3 Addr: 0x30000000
Img2 Sign: RTKWin, InfaStart @ 0x10006079
===== Enter Image 2 ====
#OTA Test Successful!

Initializing WIFI ...
Start LOG SERVICE MODE

 

 

退出debug,将micro-USB接到Power上面。 此时UART上面的输出就变成了如下所示:

=========================================================

ROM Version: 0.3

Build ToolChain Version: gcc version 4.8.3 (Realtek ASDK-4.8.3p1 Build 2003)

=========================================================
Check boot type form eFuse
SPI Initial
Image1 length: 0x36e8, Image Addr: 0x10000bc8
Image1 Validate OK, Going jump to Image1
===== Enter Image 1 ====

load NEW fw 0
Flash Image2:Addr 0xb000, Len 285152, Load to SRAM 0x10006000
Image3 length: 0x5b80, Image3 Addr: 0x30000000

 

接着就没有响应了。请问这是怎么回事?

ashion.shen 回答了