AW-CU488 Thing Plus (RTL8721DM) 與 Ameba 相容的 ARDUINO 範例表

Arduino內建許多Example, 底下的列表是Ameba支援的內建範例
請參考以下連結來設置 Ameba與Arduino IDE。
有關 Arduino 內建範例詳細信息,請參閱以下連結
CategoryNameCommentRemarks
01. BasicsAnalogReadSerialConnect potentiometer to 3.3V
ADC pin used, up to 3.3V.
ADC pin options A0, A1, A2, A3, A4, A5 and A6.
ADC pin reading voltage range 0 to 3.3V.
ADC value can be calibrated by modifying _offset and _gain using 2 points calibration method. analogSet(float gain, float offset) can be used to update the calibrated offset and gain values.
BareMinimum  
BlinkLED_BUILTIN sets to on-board LED (blue). 
DigitalReadSerial  
FadeFor “analogWrite()”, use PWM capable pin.PWM capable Pin 3, 4, 5, 6, 7, 8, 10, 11, 12, 14, 15, 17, and 26.
ReadAnalogVoltageADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset). 
02. DigitalBlinkWithoutDelayLED_BUILTIN is on-board LED (blue). 
Button LED options, on-board LED, LED_BUILTIN (blue).
Debounce 
DigitalInputPullup 
StateChangeDetection 
toneKeyboardADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset).
For “analogRead()”, use ADC pin name (A0 to A6) instead the integer number.
For “tone()” and “noTone()”, use PWM capable pin.
 
toneMelody 
toneMultiple 
tonePitchFollower 
03. AnalogAnalogInOutSerialADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset).
For “analogWrite()”, use PWM capable pin.
 
AnalogInputLED options, on-board LED.
AnalogWriteMega 
Calibration 
Fading 
Smoothing 
04. CommunicationASCIITable  
DimmerFor “analogWrite()”, use PWM capable pin. 
GraphConnect potentiometer to 3.3V.
ADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset).
 
MidiUse Serial1, MIDI jack pin 5 connected to SERIAL1_TX;
Use Serial2, MIDI jack pin 5 connected to SERIAL2_TX.
 
MultiSerial  
PhysicalPixel LED options, on-board LED.
ReadASCIIStringFor “analogWrite()”, use PWM capable pin. 
SerialCallResponseADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset).
For “analogRead()”, use ADC pin name (A0 to A6) instead the integer number.
 
SerialCallResponseASCIIADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset). 
SerialEvent  
SerialPassthrough Serial options, Serial, Serial1 or Serial2.
VirtualColorMixerADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset). 
05. ControlArrays  
ForLoopIteration  
IfStatementConditionalADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset). 
switchCaseADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset). 
switchCase2  
WhileStatementConditionalADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset). 
06. DisplaybarGraphADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset). 
RowColumnScanning 
07. StringsCharacterAnalysis  
StringAdditionOperator  
StringAppendOperator  
StringCaseChanges  
StringCharacters  
StringComparisonOperatorsADC pin used, up to 3.3V and can be calibrated by using analogSet(float gain, float offset). 
StringIndexOf  
StringLength  
StringLengthTrim  
StringReplace  
StringStartsWithEndsWith  
StringSubstring  
StringToInt  
請先確認已安裝QQ通訊軟體