Ameba Arduino: [RTL8195AM] [RTL8710AF] Use Ameba as UDP server

  • Ameba x 1


In this example, we connect Ameba to WiFi and use Ameba to be an UDP server. When Ameba receives a message from UDP client, it replies “acknowledged” message to client.

Open the WiFi Web Server example. “File” -> “Examples” -> “AmebaWiFi” -> “WiFiUdpSendReceiveString”
Modify related information, including ssid, pass, keyindex


Compile the code and upload it to Ameba. After pressing the Reset button, Ameba connects to WiFi and starts the UDP server with port 2390. After the UDP server starts service, Ameba prints the “Starting connection to server” message and waits for client connection.

As to the UDP client, we use “sockit” program in the computer to connect to UDP server.
Choose client mode and fill in the IP of UDP server (which is the IP of Ameba) and port 2390, then click “UDP Connect”.

After the connection is established, fill in “Hello World” in the Buf 0 field in sockit and click “Send”. Then you can see the Ameba UDP server replies “acknowledged”.



Code Reference

Ameba uses the WiFiUdp class which is compatible with Arduino WiFi Shield, so the
Refer to the Arduino tutorial for detailed information about this example.

First, use begin() to open an UDP port on Ameba.

Use parsePacket() to wait for data from client.

When a connection is established, use remoteIP() and remotePort() to get the IP and port of the client.

Then use read() to read the data sent by client.

To send reply, use beginPacket(), write(), end().

Please confirm that QQ communication software is installed