Ameba Arduino: [RTL8722CSM] [RTL8722DM] Display Text on E-Paper
- Ameba x 1
- Waveshare 2.9inch e-Paper HAT (D) x 1
In this example, we use the Ameba RTL8722 module connects to a Waveshare 2.9inch e-Paper module to display a texts in alphanumeric. The display uses the flexible substrate as the base plate, with interface and a reference system design. The 2.9” active area contains 296×128 pixels and has 1-bit white/black full display capabilities. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, etc… are supplied with each panel. You may refer to the official 2.9inch e-Paper HAT (D) datasheet to know more about this module. Front view of the e-Paper Module: RTL8722 wiring diagram: Firstly, you need to open the “DisplayText” example in “File” -> “Examples” -> “AmebaEink” -> “EinkDisplayText”: Upload the code to the board and press the Reset button after the uploading is done. You will find these texts displayed on the board:
 We use Good Display GDEH029A1 2.9 Inch / 296×128 Resolution / Partial Refresh Arduino Sample Code to get the e-Paper successfully Display: http://www.good-display.com/product/201.html
Realtek IoT/Wi-Fi MCU Solutions . All Rights Reserved.