Ameba MicroPython: [RTL8722CSM] [RTL8722DM] SPI - Slave Receive
Materials
- Ameba RTL8722DM x 1, Arduino UNO x 1
Steps
SPI is a fast and robust communication protocol that are commonly found on many microcontrollers and is often used to retrieve sensor data or output image signal to a display. Ameba support SPI in both master and slave mode. Here we are going to see an example demonstrating how ameba receive data in slave mode on MicroPython.
Before connection, make sure to upload the following code to your Arduino UNO.
/////////////////////// // SPI Master Write // /////////////////////// #include <SPI.h> void setup (void) { Serial.begin(115200); //set baud rate to 115200 for usart digitalWrite(SS, HIGH); // disable Slave Select SPI.begin (); } void loop (void) { char c; digitalWrite(SS, LOW); // enable Slave Select // send test string for (const char * p = "Hello, world!\r" ; c = *p; p++) { SPI.transfer(c); Serial.print(c); } Serial.println(); digitalWrite(SS, HIGH); // disable Slave Select delay(2000); }
Connection is shown as follows, here we are using unit 0 as SPI slave, and Arduino UNO as SPI master,
Then copy and paste the following code into REPL under paste mode to see their effects.
from machine import SPI s1= SPI(0 , mode = SPI.SLAVE) for i in range(14): chr(s1.read())
Realtek IoT/Wi-Fi MCU Solutions . All Rights Reserved. Terms of Use