AMB23 (RTL8722DM MINI) Supported ARDUINO built-in example table

There are many built-in examples in Arduino. In the table below, we list all examples that are compatible with Ameba.
Please refer the following link to set up Ameba for Arduino IDE. https://www.amebaiot.com/amebad-mini-arduino-getting-started/
Refer the following link for Arduino built-in example details. https://www.arduino.cc/en/Tutorial/BuiltInExamples/
Category Name Comment Remarks
01. Basics AnalogReadSerial Connect potentiometer to 3.3V. ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
BareMinimum
Blink Pin LED_BUILTIN sets to LED_B Onboard LEDs options LED_B and LED_G. (blue and green)
DigitalReadSerial Onboard button PUSH_BTN.
Fade Replace “led = 9;” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “led = 4;”
ReadAnalogVoltage ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
02. Digital BlinkWithoutDelay The onboard blue LED (LED_B) has been used. Onboard LEDs options LED_G.
Button Onboard LEDs options LED_B and LED_G. Onboard button PUSH_BTN.
Debounce Onboard LEDs options LED_B and LED_G. Onboard button PUSH_BTN.
DigitalInputPullup Onboard LEDs options LED_B and LED_G.
StateChangeDetection Onboard LEDs options LED_B and LED_G. Onboard button PUSH_BTN.
toneKeyboard Replace “tone(8, notes[thisSensor], 20);” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “tone(21, notes[thisSensor], 20);”
toneMelody Replace “tone(8, notes[thisSensor], 20);” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “tone(21, notes[thisSensor], 20);”
toneMultiple Replace “tone(8, notes[thisSensor], 20);” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “tone(21, notes[thisSensor], 20);”
tonePitchFollower Replace “tone(8, notes[thisSensor], 20);” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “tone(21, notes[thisSensor], 20);”
03. Analog AnalogInOutSerial Replace “analogOutPin = 9;” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “analogOutPin = 4;” ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
AnalogInput Onboard LEDs options LED_B and LED_G. ADC pin reading voltage range 0 to 3.3V.
Analog Write Mega Use PWM pins D4, D5, D7, D12, D13, D14, D17, D20, or D21.
Calibration Onboard LEDs options LED_B and LED_G. Onboard button PUSH_BTN. ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
Fading Replace “ledPin = 9;” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “ledPin = 4;”
Smoothing ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
04. Communication ASCIITable
Dimmer Onboard LEDs options LED_B and LED_G.
Graph Connect potentiometer to 3.3V. ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
Midi Use Serial1 and pin D18, or use Serial2 and pin D1.
MultiSerial
PhysicalPixel Onboard LEDs options LED_B and LED_G.
ReadASCIIString Use PWM pin for LED (D4, D5, D7, D12, D13, D14, D17, D20, or D21).
SerialCallResponse ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
SerialCallResponseASCII ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
SerialEvent
SerialPassthrough Serial options, Serial1 or Serial2.
VirtualColorMixer ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
05. Control Arrays Use pins D1, D2, D3, D4, D5, D6.
ForLoopIteration Use pins D1, D2, D3, D4, D5, D6.
IfStatementConditional ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V. Onboard LEDs options LED_B and LED_G.
switchCase ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
switchCase2 Use pins D1, D2, D3, D4, D5, D6.
WhileStatementConditional Replace “ledPin = 9;” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “ledPin = 4;” ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
06. Display barGraph ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
RowColumnScanning ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
07. Strings CharacterAnalysis
StringAdditionOperator
StringAppendOperator
StringCaseChanges
StringCharacters
StringComparisonOperators ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
StringIndexOf
StringLength
StringLengthTrim
StringReplace
StringStartsWithEndsWith
StringSubstring
StringToInt
Please confirm that QQ communication software is installed