BLEScan Class

BLEScan Class

Description
A class used for managing BLE scanning settings.

Syntax
class BLEScan

Members

Public Constructors
No public constructor is available as this class is intended to be a singleton class. You can get a pointer to this class using BLEDevice::configScan.
Public Methods 
BLEScan::updateScanParamsUpdate the lower Bluetooth stack with the current scan settings.
BLEScan::startScanStart a BLE scan.
BLEScan::stopScanStop a BLE scan.
BLEScan::setScanModeSet the BLE scanning mode.
BLEScan::setScanIntervalSet the BLE scanning interval.
BLEScan::setScanWindowSet the BLE scanning window.
BLEScan::setScanDuplicateFilterSet the BLE scan duplicate filter.
BLEScan::scanInProgressCheck if a scan is currently in progress.
BLEScan::printScanInfoPrint out scanned information.

BLEScan::updateScanParams

Description
Update the lower Bluetooth stack with the current scan settings.

Syntax
void updateScanParams(void);

Parameters
NA

Returns
NA

Example Code
Example: BLEScan
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/BLE/examples/BLEScan/BLEScan.ino)

Notes and Warnings
Stop any scans in progress first before using this function. “BLEScan.h” must be included to use the class function.

BLEScan::startScan

Description
Start BLE scanning.

Syntax
void startScan(void);
void startScan(uint32_t scanDuration_ms);

Parameters
scanDuration: BLE scan will stop after scanDuration milliseconds.

Returns
NA

Example Code
Example: BLEScan
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/BLE/examples/BLEScan/BLEScan.ino)

Notes and Warnings
Set the scan parameters first before starting a scan. BLE scans will occur continuously for the duration set with BLEDevice::setScanWindow() and will repeat with a time interval set with BLEDevice::setScanInterval(). Call this member function without an argument to start scanning until BLEDevice::stopScan() is called. “BLEScan.h” must be included to use the class function.

BLEScan::stopScan

Description
Stop BLE scanning.

Syntax
void stopScan(void);

Parameters
NA

Returns
NA

Example Code
NA

Notes and Warnings
“BLEScan.h” must be included to use the class function.

BLEScan::setScanMode

Description
Set the BLE scanning mode.

Syntax
void setScanMode(uint8_t scanMode);

Parameters
scanMode: GAP_SCAN_MODE_PASSIVE for passive scanning, GAP_SCAN_MODE_ACTIVE for active scanning
Default value: GAP_SCAN_MODE_ACTIVE

Returns
NA

Example Code
Example: BLEScan
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/BLE/examples/BLEScan/BLEScan.ino)

Notes and Warnings
Active scanning will request for scan response packets after discovering an advertising device. Passive scanning will only capture advertising data packets. “BLEScan.h” must be included to use the class function.

BLEScan::setScanInterval

Description
Set the BLE scanning interval.

Syntax
void setScanInterval(uint16_t scanInt_ms);

Parameters
scanInt_ms: scan interval in milliseconds. Value range of 3 to 10240. Default value of 40ms.

Returns
NA

Example Code
Example: BLEScan
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/BLE/examples/BLEScan/BLEScan.ino)

Notes and Warnings
A BLE scan will repeat with a time interval set with this member function. “BLEScan.h” must be included to use the class function.

BLEScan::setScanWindow

Description
Set the BLE scanning window.

Syntax
void setScanWindow(uint16_t scanWindow_ms);

Parameters
scanWindow_ms: scan window in milliseconds. Value range of 3 to 10240. Default value of 30ms.

Returns
NA

Example Code
Example: BLEScan
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/BLE/examples/BLEScan/BLEScan.ino)

Notes and Warnings
A BLE scan will scan continuously for a window duration set with this member function. The scan window should be less than or equal to the scan interval. “BLEScan.h” must be included to use the class function.

BLEScan::setScanDuplicateFilter

Description
Set the scan duplicate filter.

Syntax
void setScanDuplicateFilter(bool dupeFilter);

Parameters
dupeFilter: TRUE to enable duplicate filtering. Enabled by default.

Returns
NA

Example Code
NA

Notes and Warnings
Enabling duplicate filters will ignore scan results for devices already discovered previously. “BLEScan.h” must be included to use the class function.

BLEScan::scanInProgress

Description
Check if scanning is currently in progress.

Syntax
bool scanInProgress(void);

Parameters
NA

Returns
This function returns TRUE if BLE scanning is in progress.

Example Code
NA

Notes and Warnings
“BLEScan.h” must be included to use the class function.

BLEScan::printScanInfo

Description
Parse and print out scanned information.

Syntax
void printScanInfo(T_LE_CB_DATA* p_data);

Parameters
p_data: pointer to scan data of type T_LE_CB_DATA*.

Returns
NA

Example Code
Example: BLEScan
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/BLE/examples/BLEScan/BLEScan.ino)

Notes and Warnings
Use this member function to parse the various fields of received advertisement data packets and print the results out to the serial monitor. “BLEScan.h” must be included to use the class function.

Please confirm that QQ communication software is installed