0
Tyler Wojciechowicz

Hello,

I'm trying to turn the LED demo seen here:

Ameba Arduino: [RTL8195] Amazon Alexa

 

I've configured everything correctly in Lambda and AWS, and tested the trigger and everything works as expected. I added my certifications to my Arduino code, but when I boot, I get the following error. I can never get my RTL8195 ameba to connect to the console. Does anyone know what the following error is due to?

ERROR: ssl_handshake ret(-0x7780)
failed, rc=-2 try again in 5 seconds
Attempting MQTT connection...

 

 

WIFI initialized

RTL8195A[Driver]: set ssid [****]

RTL8195A[Driver]: start auth to 58:6d:8f:ff:f5:a4

RTL8195A[Driver]: auth success, start assoc

RTL8195A[Driver]: association success(res=32)

RTL8195A[Driver]: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4)

RTL8195A[Driver]: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1

Interface 0 IP address : 192.168.50.121Attempting MQTT connection...
Verify requested for (Depth 2):
ceThis certificate has no flags

Verify requested for (Depth 1):
ceThis certificate has no flags

Verify requested for (Depth 0):
ceThis certificate has no flags
ERROR: ssl_handshake ret(-0x7780)
failed, rc=-2 try again in 5 seconds
Attempting MQTT connection...
Verify requested for (Depth 2):
ceThis certificate has no flags

Verify requested for (Depth 1):
ceThis certificate has no flags

Verify requested for (Depth 0):
ceThis certificate has no flags
ERROR: ssl_handshake ret(-0x7780)
failed, rc=-2 try again in 5 seconds
Attempting MQTT connection...
Verify requested for (Depth 2):
ceThis certificate has no flags

Verify requested for (Depth 1):
ceThis certificate has no flags

Verify requested for (Depth 0):
ceThis certificate has no flags
ERROR: ssl_handshake ret(-0x7780)
failed, rc=-2 try again in 5 seconds

Tyler Wojciechowicz 回答了