0
jihuanglee

Hi,

Seems there's a DHCP problem on sdk-ameba-v4.0b_without_NDA_GCC_V1.0.0.

I used the default code without modification, and type commands via UART.

Here's the procedure to duplicate the issue:

  1. Starts AP

# ATW3=iot

# ATW4=12345678

# ATW5=6

# ATWA

2. the 1st STA connects to AP

# ATW0=iot

# ATW1=12345678

# ATWC

Can connect to AP and get IP from AP.

3. the 2nd STA connects to AP

# ATW0=iot

# ATW1=12345678

# ATWC

Can connect to AP and get IP from AP.

4. Reset the 2nd STA and connect again, but can't get IP from AP.

After this procedure, the 2nd STA or the 3rd STA can't get IP from AP any more.

At the moment, the 1st STA still can get IP from AP after resetting.

Appreciate if any input.

 

Thanks.

JH

sean 回答了