WiFiSSLClient Class

WiFiSSLClient Class

Description
A class for Wi-Fi Secure Socket Layer Client implementation for Ameba.

Syntax
class WiFiSSLClient

Members

Public Constructors 
WiFiSSLClient::WiFiSSLClientConstructs a WiFiSSLClient instance that always connects in SSL to the specified IP address and port.
Public Methods 
WiFiSSLClient::connectConnect to the IP address and port.
WiFiSSLClient::writeWrite data (single byte) to the server.
WiFiSSLClient::availableGet the availability of the Wi-Fi SSL socket for reading.
WiFiSSLClient::readRead the incoming byte from the server.
WiFiSSLClient::peekGet the next byte from the current packet without moving on to the next byte.
WiFiSSLClient::flushClear all the bytes that have been written to the client but not yet read.
WiFiSSLClient::stopDisconnect from the server.
WiFiSSLClient::connectedCheck if SSL client is connected.
WiFiSSLClient::setRootCASet Root CA for authentication.
WiFiSSLClient::setClientCertificateSet certificate of the client.
WiFiSSLClient::setRecvTimeoutSet receiving timeout.
WiFiSSLClient::setPreSharedKeySet the Pre Shared Key (PSK) to use for authentication.

WiFiSSLClient::WiFiSSLClient

Description
Constructs a WiFiSSLClient instance that always connects in SSL to the specified IP address and port.

Syntax
WiFiSSLClient(void);
WiFiSSLClient(uint8_t sock);

Parameters
sock: socket state, default -1.

Returns
NA

Example Code
Example: WiFiSSLClient
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/WiFi/examples/WiFiSSLClient/WiFiSSLClient.ino)

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::connect

Description
Connect to the IP address and port.

Syntax
virtual int connect(IPAddress ip, uint16_t port);
virtual int connect(const char *host, uint16_t port);
virtual uint8_t connected(void);
int connect(const char *host, uint16_t port, unsigned char* rootCABuff, unsigned char* cli_cert, unsigned char* cli_key);
int connect(IPAddress ip, uint16_t port, unsigned char* rootCABuff, unsigned char* cli_cert, unsigned char* cli_key);
int connect(const char *host, uint16_t port, unsigned char* pskIdent, unsigned char* psKey);
int connect(IPAddress ip, uint16_t port, unsigned char* pskIdent, unsigned char* psKey);

Parameters
ip: IP address
host: Host name
port: the port to listen to
rootCABuff: buffer that store root CA
cli_cert: buffer that store client certificate
cli_key: buffer that store client key pair
pskIdent: identity for PSK
psKey: Pre shared key

Returns
This function returns “1” if successful, else returns “0”.

Example Code
Example: WiFiSSLClient
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/WiFi/examples/WiFiSSLClient/WiFiSSLClient.ino)

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::write

Description
Write data (single byte) to the server the SSL client is connected to.

Syntax
virtual size_t write(uint8_t);
virtual size_t write(const uint8_t *buf, size_t size);

Parameters

buf: a pointer to an array containing the outgoing message
size: the size of the buffer

Returns
This function returns the byte/ character that will be written to the server or the size of the buffer.

Example Code
NA

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::available

Description
Get the availability of the Wi-Fi SSL socket for reading.

Syntax
virtual int available(void);

Parameters
NA

Returns
This function returns “1” and number of bytes available for reading if there are available data, else returns 0.

Example Code
Example: WiFiSSLClient
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/WiFi/examples/WiFiSSLClient/WiFiSSLClient.ino)

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::read

Description
Read the incoming byte from the server that the SSL client is connected to.

Syntax
virtual int read(void);
virtual int read(uint8_t *buf, size_t size);

Parameters
buf: buffer that holds incoming data in 8-bit.
size: maximum size of the buffer.

Returns
This function returns the size of the buffer or returns “-1” if no buffer is available.

Example Code
Example: WiFiSSLClient
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/WiFi/examples/WiFiSSLClient/WiFiSSLClient.ino)

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::peek

Description
Get the next byte from the current packet without moving on to the next byte.

Syntax
virtual int peek(void);

Parameters
NA

Returns
This function returns the next byte or character, else returns -1 if none is available.

Example Code
NA

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::flush

Description
Clear all the bytes that have been written to the client but not yet read.

Syntax
virtual void flush(void);

Parameters
NA

Returns
NA

Example Code
NA

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::stop

Description
Disconnect from the server.

Syntax
virtual void stop (void);

Parameters
NA

Returns
NA

Example Code
Example: WiFiSSLClient
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/WiFi/examples/WiFiSSLClient/WiFiSSLClient.ino)

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::connected

Description
Check if SSL client is connected.

Syntax
virtual uint8_t connected(void);

Parameters
NA

Returns
The function returns “1” if the SSLClient socket is connected, else returns “0” if not connected.

Example Code
Example: WiFiSSLClient
(https://github.com/ambiot/ambd_arduino/blob/dev/Arduino_package/hardware/libraries/WiFi/examples/WiFiSSLClient/WiFiSSLClient.ino)

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::setRootCA

Description
Set Root CA(certification authority) for SSL authentication.

Syntax
void setRootCA(unsigned char *rootCA);

Parameters
rootCA: a string of rootCA

Returns
NA

Example Code
NA

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::setClientCertificate

Description
Set certificate of the client.

Syntax
void setClientCertificate(unsigned char *client_ca, unsigned char *private_key);

Parameters
client_ca: Client certificate
private_key: client’s private key pair

Returns
NA

Example Code
NA

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::setRecvTimeout

Description
This function sets the SSL client socket receiving timeout.

Syntax
int setRecvTimeout(int timeout);

Parameters
timeout: timeout in seconds.

Returns
The function returns “0”.

Example Code
NA

Notes and Warnings
“WiFiSSLClient.h” must be included to use the class function.

WiFiSSLClient::setPreSharedKey

Description
Set the Pre Shared Key (PSK) to use for authentication.

Syntax
void setPreSharedKey(unsigned char *pskIdent, unsigned char *psKey);

Parameters
pskIdent: identity for PSK
psKey: Pre shared key

Returns
NA

Example Code
NA

Notes and Warnings
Do not set a root CA and client certificate if PSK should be used for authentication. If root CA, client certificate and PSK are all set, certificate-based authentication will be used. “WiFiSSLClient.h” must be included to use the class function.

請先確認已安裝QQ通訊軟體