WiFiClass Class

WiFiClass Class

Description
Defines a class of WiFi and network implementation for Ameba.

Syntax
class WiFiClass

Members

Public Constructors 
WiFiClass::WiFiClassConstructs a WiFiClass object and initializes the WiFi libraries and network settings
Public Methods 
WiFiClass::firmwareVersionGet firmware version
WiFiClass:: beginStart Wifi connection for OPEN networks
WiFiClass:: disconnectDisconnect from the network
WiFiClass:: macAddressGet the interface MAC address
WiFiClass:: localIPGet the interface IP address
WiFiClass:: subnetMaskGet the interface subnet mask address
WiFiClass:: gatewayIPGet the gateway IP address
WiFiClass:: SSIDReturn the current SSID associated with the network
WiFiClass:: BSSIDReturn the current BSSID associated with the network
WiFiClass:: RSSIReturn the current RSSI (Received Signal Strength in dBm) associated with the network
WiFiClass:: encryptionTypeReturn the Encryption Type associated with the network
WiFiClass:: scanNetworksStart scan WiFi networks available
WiFiClass:: SSIDReturn the SSID discovered during the network scan
WiFiClass:: encryptionTypeReturn the encryption type of the networks discovered during the scanNetworks
WiFiClass:: encryptionTypeExReturn the security type and encryption type of the networks discovered during the scanNetworks
WiFiClass:: RSSIReturn the RSSI of the networks discovered during the scanNetworks
WiFiClass:: statusReturn Connection status
WiFiClass:: hostByNameResolve the given hostname to an IP address
WiFiClass:: apbeginStart AP mode
WiFiClass:: disablePowerSaveDisable power-saving mode

WiFiClass::WiFiClass

Description
Constructs a WiFiClass object and initializes the WiFi libraries and network settings.

Syntax
WiFiClass::WiFiClass(void)

Parameters
The function requires no input parameter.

Returns
The function returns nothing.

Example Code
NA

Notes and Warnings
An instance of WiFiClass is created as WiFi inside WiFi.h and is extern for direct use.
 

WiFiClass::firmwareVersion

Description
Get firmware version

Syntax
char* WiFiClass::firmwareVersion(void)

Parameters
The function requires no input parameter.

Returns
WiFi firmware version

Example Code
Example: ConnectWithWPA
This example demos how to connect to an unencrypted WiFI network, and prints the MAC address of the Wifi shield, the IP address obtained, and other network details.

#include <WiFi.h>   
  
// char ssid[] = "yourNetwork";     //  your network SSID (name)  
// char pass[] = "secretPassword";  // your network password  
char ssid[] = "SINGTEL-D45F";       // your network SSID (name)  
char pass[] = "mooxuteeth";         // your network key  
int status = WL_IDLE_STATUS;        // the Wifi radio's status  
  
void setup() {  
  //Initialize serial and wait for port to open:  
  Serial.begin(9600);  
  while (!Serial) {  
    ; // wait for serial port to connect. Needed for native USB port only  
  }  
  
  // check for the presence of the shield:  
  if (WiFi.status() == WL_NO_SHIELD) {  
    Serial.println("WiFi shield not present");  
    // don't continue:  
    while (true);  
  }  
  
  String fv = WiFi.firmwareVersion();  
  if (fv != "1.1.0") {  
    Serial.println("Please upgrade the firmware");  
  }  
  
  // attempt to connect to Wifi network:  
  while (status != WL_CONNECTED) {  
    Serial.print("Attempting to connect to WPA SSID: ");  
    Serial.println(ssid);  
    // Connect to WPA/WPA2 network:  
    status = WiFi.begin(ssid, pass);  
  
    // wait 10 seconds for connection:  
    delay(10000);  
  }  
  
  // you're connected now, so print out the data:  
  Serial.print("You're connected to the network");  
  printCurrentNet();  
  printWifiData();  
  
}  
  
void loop() {  
  // check the network connection once every 10 seconds:  
  delay(10000);  
  printCurrentNet();  
}  
  
void printWifiData() {  
  // print your WiFi shield's IP address:  
  IPAddress ip = WiFi.localIP();  
  Serial.print("IP Address: ");  
  Serial.println(ip);  
  Serial.println(ip);  
  
  // print your MAC address:  
  byte mac[6];  
  WiFi.macAddress(mac);  
  Serial.print("MAC address: ");  
  Serial.print(mac[0], HEX);  
  Serial.print(":");  
  Serial.print(mac[1], HEX);  
  Serial.print(":");  
  Serial.print(mac[2], HEX);  
  Serial.print(":");  
  Serial.print(mac[3], HEX);  
  Serial.print(":");  
  Serial.print(mac[4], HEX);  
  Serial.print(":");  
  Serial.println(mac[5], HEX);  
}  
  
void printCurrentNet() {  
  // print the SSID of the network you're attached to:  
  Serial.print("SSID: ");  
  Serial.println(WiFi.SSID());  
  
  // print the MAC address of the router you're attached to:  
  byte bssid[6];  
  WiFi.BSSID(bssid);  
  Serial.print("BSSID: ");  
  Serial.print(bssid[5], HEX);  
  Serial.print(":");  
  Serial.print(bssid[4], HEX);  
  Serial.print(":");  
  Serial.print(bssid[3], HEX);  
  Serial.print(":");  
  Serial.print(bssid[2], HEX);  
  Serial.print(":");  
  Serial.print(bssid[1], HEX);  
  Serial.print(":");  
  Serial.println(bssid[0], HEX);  
  
  // print the received signal strength:  
  long rssi = WiFi.RSSI();  
  Serial.print("signal strength (RSSI):");  
  Serial.println(rssi);  
	  
  // print the encryption type:  
  byte encryption = WiFi.encryptionType();  
  Serial.print("Encryption Type:");  
  Serial.println(encryption, HEX);  
  Serial.println();  
} 

Notes and Warnings
NA
 

WiFiClass::begin

Description
Start Wifi connection for OPEN networks

Syntax
int WiFiClass::begin(char* ssid)
int WiFiClass::begin(char* ssid, uint8_t key_idx, const char *key)
int WiFiClass::begin(char* ssid, const char *passphrase)

Parameters
ssid: Pointer to the SSID string
key_idx: The key index to set. Valid values are 0-3.
key: Key input buffer.
passphrase: Passphrase. Valid characters in a passphrase must be between ASCII 32-126 (decimal).

Returns
WiFi status

Example Code
Example: ConnectWithWPA
This example demos how to connect to an unencrypted WiFi network, and prints the MAC address of the Wifi shield, the IP address obtained, and other network details. The details of the code can be found in the previous section of WiFiClass:: firmwareVersion.

Notes and Warnings
NA
 

WiFiClass::disconnect

Description
Disconnect from the network

Syntax
int WiFiClass::disconnect(void)

Parameters
The function requires no input parameter.

Returns
The function returns one value of wl_status_t enum as an integer.

Example Code
NA

Notes and Warnings
NA
 

WiFiClass::macAddress

Description
Get the interface MAC address

Syntax
uint8_t* WiFiClass::macAddress(uint8_t* mac)

Parameters
mac: an array to store MAC address

Returns
The function returns a pointer to uint8_t array with length WL_MAC_ADDR_LENGTH.

Example Code
Example: ConnectWithWPA
This example demos how to connect to an unencrypted WiFi network, and prints the MAC address of the Wifi shield, the IP address obtained, and other network details. The details of the code can be found in the previous section of WiFiClass:: firmwareVersion.

Notes and Warnings
NA
 

WiFiClass::localIP

Description
Get the interface IP address

Syntax
IPAddress WiFiClass::localIP(void)

Parameters
The function requires no input parameter.

Returns
Ip address value

Example Code
Example: ConnectWithWPA
This example demos how to connect to an unencrypted WiFi network, and prints the MAC address of the Wifi shield, the IP address obtained, and other network details. The details of the code can be found in the previous section of WiFiClass:: firmwareVersion.

Notes and Warnings
NA
 

WiFiClass::subnetMask

Description
Get the interface subnet mask address

Syntax
IPAddress WiFiClass::subnetMask(void)

Parameters
The function requires no input parameter.

Returns
subnet mask address value

Example Code
Example: ConnectNoEncryption
This example demonstrates how to connect to an unencrypted WiFi network and prints the MAC address of the WiFi shield, the IP address obtained, and other network details.

#include <WiFi.h>   
  
char ssid[] = "SINGTEL-D45F_5G";     // the name of your network  
int status = WL_IDLE_STATUS;     // the Wifi radio's status  
  
void setup() {  
  //Initialize serial and wait for port to open:  
  Serial.begin(9600);  
  while (!Serial) {  
    ; // wait for serial port to connect. Needed for native USB port only  
  }  
  
  // check for the presence of the shield:  
  if (WiFi.status() == WL_NO_SHIELD) {  
    Serial.println("WiFi shield not present");  
    // don't continue:  
    while (true);  
  }  
  
  String fv = WiFi.firmwareVersion();  
  if (fv != "1.1.0") {  
    Serial.println("Please upgrade the firmware");  
  }  
  
  // attempt to connect to Wifi network:  
  while (status != WL_CONNECTED) {  
    Serial.print("Attempting to connect to open SSID: ");  
    Serial.println(ssid);  
    status = WiFi.begin(ssid);  
  
    // wait 10 seconds for connection:  
    delay(10000);  
  }  
  
  // you're connected now, so print out the data:  
  Serial.print("You're connected to the network");  
  printCurrentNet();  
  printWifiData();  
}  
  
void loop() {  
  // check the network connection once every 10 seconds:  
  delay(10000);  
  printCurrentNet();  
}  
  
void printWifiData() {  
  // print your WiFi shield's IP address:  
  IPAddress ip = WiFi.localIP();  
  Serial.print("IP Address: ");  
  Serial.println(ip);  
  Serial.println(ip);  
  
  // print your MAC address:  
  byte mac[6];  
  WiFi.macAddress(mac);  
  Serial.print("MAC address: ");  
  Serial.print(mac[0], HEX);  
  Serial.print(":");  
  Serial.print(mac[1], HEX);  
  Serial.print(":");  
  Serial.print(mac[2], HEX);  
  Serial.print(":");  
  Serial.print(mac[3], HEX);  
  Serial.print(":");  
  Serial.print(mac[4], HEX);  
  Serial.print(":");  
  Serial.println(mac[5], HEX);  
  
  // print your subnet mask:  
  IPAddress subnet = WiFi.subnetMask();  
  Serial.print("NetMask: ");  
  Serial.println(subnet);  
  
  // print your gateway address:  
  IPAddress gateway = WiFi.gatewayIP();  
  Serial.print("Gateway: ");  
  Serial.println(gateway);  
}  
  
void printCurrentNet() {  
  // print the SSID of the network you're attached to:  
  Serial.print("SSID: ");  
  Serial.println(WiFi.SSID());  
  
  // print the MAC address of the router you're attached to:  
  byte bssid[6];  
  WiFi.BSSID(bssid);  
  Serial.print("BSSID: ");  
  Serial.print(bssid[5], HEX);  
  Serial.print(":");  
  Serial.print(bssid[4], HEX);  
  Serial.print(":");  
  Serial.print(bssid[3], HEX);  
  Serial.print(":");  
  Serial.print(bssid[2], HEX);  
  Serial.print(":");  
  Serial.print(bssid[1], HEX);  
  Serial.print(":");  
  Serial.println(bssid[0], HEX);  
	  
  // print the received signal strength:  
  long rssi = WiFi.RSSI();  
  Serial.print("signal strength (RSSI):");  
  Serial.println(rssi);  
	  
  // print the encryption type:  
  byte encryption = WiFi.encryptionType();  
  Serial.print("Encryption Type:");  
  Serial.println(encryption, HEX);  
}  

Notes and Warnings
NA
 

WiFiClass::gatewayIP

Description
Get the gateway IP address

Syntax
IPAddress WiFiClass::gatewayIP(void)

Parameters
The function requires no input parameter.

Returns
The function returns the value of the gateway IP address.

Example Code
Example: ConnectNoEncryption
This example demonstrates how to connect to an unencrypted WiFi network and prints the MAC address of the WiFi shield, the IP address obtained, and other network details. Details of the code can be found in the section of WiFiClass:: subnetMask.

Notes and Warnings
NA
 

WiFiClass::SSID

Description
Return the current SSID associated with the network

Syntax
char* WiFiClass::SSID(void)

Parameters
The function requires no input parameter.

Returns
The function returns current SSID associate with the network.

Example Code
Example: ConnectWithWPA
This example demos how to connect to an unencrypted WiFi network, and prints the MAC address of the Wifi shield, the IP address obtained, and other network details. The details of the code can be found in the previous section of WiFiClass:: firmwareVersion.

Notes and Warnings
NA
 

WiFiClass::BSSID

Description
Return the current BSSID associated with the network

Syntax
uint8_t* WiFiClass::BSSID(uint8_t* bssid)

Parameters
bssid: an array to store bssid

Returns
pointer to uint8_t array with length WL_MAC_ADDR_LENGTH

Example Code
Example: ConnectWithWPA
This example demos how to connect to an unencrypted WiFi network, and prints the MAC address of the Wifi shield, the IP address obtained, and other network details. The details of the code can be found in the previous section of WiFiClass:: firmwareVersion.

Notes and Warnings
NA
 

WiFiClass::RSSI

Description
Return the current RSSI (Received Signal Strength in dBm) associated with the network

Syntax
int32_t WiFiClass::RSSI(void)

Parameters
The function requires no input parameter.

Returns
The function returns a signed-value signal strength

Example Code
Example: ConnectWithWPA
This example demos how to connect to an unencrypted WiFi network, and prints the MAC address of the Wifi shield, the IP address obtained, and other network details. The details of the code can be found in the previous section of WiFiClass:: firmwareVersion.

Notes and Warnings
NA
 

WiFiClass::encryptionType

Description
Return the Encryption Type associated with the network

Syntax
uint8_t WiFiClass::encryptionType(void)

Parameters
The function requires no input parameter.

Returns
The function returns one unsigned integer value of wl_enc_type enum.

Example Code
Example: ConnectWithWPA

Notes and Warnings
NA
 

WiFiClass::scanNetworks

Description
Start scan WiFi networks available

Syntax
int8_t WiFiClass::scanNetworks(void)

Parameters
The function requires no input parameter.

Returns
The function returns the number of discovered networks as an integer.

Example Code
Example: ScanNetworks
This example prints the Wifi shield’s MAC address, and scans for available Wifi networks using the Wifi shield. Every ten seconds, it scans again. It doesn’t connect to any network, so no encryption scheme is specified.

#include <WiFi.h>   
  
void setup() {  
  //Initialize serial and wait for port to open:  
  Serial.begin(9600);  
  while (!Serial) {  
    ; // wait for serial port to connect. Needed for native USB port only  
  }  
  
  // check for the presence of the shield:  
  if (WiFi.status() == WL_NO_SHIELD) {  
    Serial.println("WiFi shield not present");  
    // don't continue:  
    while (true);  
  }  
  
  String fv = WiFi.firmwareVersion();  
  if (fv != "1.1.0") {  
    Serial.println("Please upgrade the firmware");  
  }  
  
  // Print WiFi MAC address:  
  printMacAddress();  
}  
  
void loop() {  
  // scan for existing networks:  
  Serial.println("Scanning available networks...");  
  listNetworks();  
  delay(10000);  
}  
  
void printMacAddress() {  
  // the MAC address of your Wifi shield  
  byte mac[6];  
  
  // print your MAC address:  
  WiFi.macAddress(mac);  
  Serial.print("MAC: ");  
  Serial.print(mac[0], HEX);  
  Serial.print(":");  
  Serial.print(mac[1], HEX);  
  Serial.print(":");  
  Serial.print(mac[2], HEX);  
  Serial.print(":");  
  Serial.print(mac[3], HEX);  
  Serial.print(":");  
  Serial.print(mac[4], HEX);  
  Serial.print(":");  
  Serial.println(mac[5], HEX);  
}  
  
void listNetworks() {  
  // scan for nearby networks:  
  Serial.println("** Scan Networks **");  
  int numSsid = WiFi.scanNetworks();  
  if (numSsid == -1) {  
    Serial.println("Couldn't get a wifi connection");  
    while (true);  
  }  
  
  // print the list of networks seen:  
  Serial.print("number of available networks:");  
  Serial.println(numSsid);  
  
  // print the network number and name for each network found:  
  for (int thisNet = 0; thisNet < numSsid; thisNet++) {  
    Serial.print(thisNet);  
    Serial.print(") ");  
    Serial.print(WiFi.SSID(thisNet));  
    Serial.print("\tSignal: ");  
    Serial.print(WiFi.RSSI(thisNet));  
    Serial.print(" dBm");  
    Serial.print("\tEncryptionRaw: ");  
    printEncryptionTypeEx(WiFi.encryptionTypeEx(thisNet));  
    Serial.print("\tEncryption: ");  
    printEncryptionType(WiFi.encryptionType(thisNet));  
  }  
}  
  
void printEncryptionTypeEx(uint32_t thisType) {  
  /*  Arduino wifi api use encryption type to mapping to security type. 
   *  This function demonstrate how to get more richful information of security type. 
   */  
  switch (thisType) {  
    case SECURITY_OPEN:  
      Serial.print("Open");  
      break;  
    case SECURITY_WEP_PSK:  
      Serial.print("WEP");  
      break;  
    case SECURITY_WPA_TKIP_PSK:  
      Serial.print("WPA TKIP");  
      break;  
    case SECURITY_WPA_AES_PSK:  
      Serial.print("WPA AES");  
      break;  
    case SECURITY_WPA2_AES_PSK:  
      Serial.print("WPA2 AES");  
      break;  
    case SECURITY_WPA2_TKIP_PSK:  
      Serial.print("WPA2 TKIP");  
      break;  
    case SECURITY_WPA2_MIXED_PSK:  
      Serial.print("WPA2 Mixed");  
      break;  
    case SECURITY_WPA_WPA2_MIXED:  
      Serial.print("WPA/WPA2 AES");  
      break;  
  }  
}  
	  
void printEncryptionType(int thisType) {  
  // read the encryption type and print out the name:  
  switch (thisType) {  
    case ENC_TYPE_WEP:  
      Serial.println("WEP");  
      break;  
    case ENC_TYPE_TKIP:  
      Serial.println("WPA");  
      break;  
    case ENC_TYPE_CCMP:  
      Serial.println("WPA2");  
      break;  
    case ENC_TYPE_NONE:  
      Serial.println("None");  
      break;  
    case ENC_TYPE_AUTO:  
      Serial.println("Auto");  
      break;  
  }  
}  

Notes and Warnings
NA
 

WiFiClass::SSID

Description
Return the SSID discovered during the network scan

Syntax
char* WiFiClass::SSID(uint8_t networkItem)

Parameters
networkItem: specify from which network item want to get the information

Returns
The function returns ssid string of the specified item on the networks scanned a list.

Example Code
Example: ScanNetworks
This example prints the Wifi shield’s MAC address, and scans for available Wifi networks using the Wifi shield. Every ten seconds, it scans again. It doesn’t connect to any network, so no encryption scheme is specified. The details of the code can be found in the previous section of WiFiClass:: scanNetworks.

Notes and Warnings
NA
 

WiFiClass::encryptionType

Description
Return the encryption type of the networks discovered during the scanNetworks

Syntax
uint8_t WiFiClass::encryptionType(uint8_t networkItem)

Parameters
networkItem: specify from which network item want to get the information

Returns
encryption type (enum wl_enc_type) of the specified item on the networks scanned a list

Example Code
Example: ScanNetworks
This example prints the Wifi shield’s MAC address, and scans for available Wifi networks using the Wifi shield. Every ten seconds, it scans again. It doesn’t connect to any network, so no encryption scheme is specified. The details of the code can be found in the previous section of WiFiClass:: scanNetworks.

Notes and Warnings
NA
 

WiFiClass::encryptionTypeEx

Description
Return the security type and encryption type of the networks discovered during the scanNetworks

Syntax
uint32_t WiFiClass::encryptionTypeEx(uint8_t networkItem)

Parameters
networkItem: specify from which network item want to get the information

Returns
security and encryption type of the specified item on the networks scanned a list

Example Code
Example: ScanNetworks
This example prints the Wifi shield’s MAC address, and scans for available Wifi networks using the Wifi shield. Every ten seconds, it scans again. It doesn’t connect to any network, so no encryption scheme is specified. The details of the code can be found in the previous section of WiFiClass:: scanNetworks.

Notes and Warnings
NA
 

WiFiClass::RSSI

Description
Return the RSSI of the networks discovered during the scanNetworks

Syntax
int32_t WiFiClass::RSSI(uint8_t networkItem)

Parameters
networkItem: specify from which network item want to get the information

Returns
signed value of RSSI of the specified item on the networks scanned a list

Example Code
Example: ScanNetworks
This example prints the Wifi shield’s MAC address, and scans for available Wifi networks using the Wifi shield. Every ten seconds, it scans again. It doesn’t connect to any network, so no encryption scheme is specified. The details of the code can be found in the previous section of WiFiClass:: scanNetworks.

Notes and Warnings
NA
 

WiFiClass::status

Description
Return Connection status

Syntax
uint8_t WiFiClass::status(void)

Parameters
The function requires no input parameter.

Returns
The function returns one of the values defined in wl_status_t as an unsigned integer.

Example Code
Example: ConnectWithWPA
This example demos how to connect to an unencrypted WiFi network, and prints the MAC address of the Wifi shield, the IP address obtained, and other network details. The details of the code can be found in the previous section of WiFiClass:: firmwareVersion.

Notes and Warnings
NA
 

WiFiClass::hostByName

Description
Resolve the given hostname to an IP address

Syntax
int WiFiClass::hostByName(const char* aHostname, IPAddress& aResult)

Parameters
aHostname: Name to be resolved
aResult: IPAddress structure to store the returned IP address

Returns
The function returns “1” if aIPAddrString was successfully converted to an IP address,else otherwise, it will return as an error code.

Example Code
NA

Notes and Warnings
NA
 

WiFiClass::apbegin

Description
Start AP mode

Syntax
int WiFiClass::apbegin(char* ssid, char* channel)
int WiFiClass::apbegin(char* ssid, char* password, char* channel)

Parameters
ssid: SSID of the AP network
channel: AP’s channel, default 1
password: AP’s password

Returns
The function will return the WiFi status.

Example Code
Example: WiFiAPMode

#include <WiFi.h>   
char ssid[] = "yourNetwork";  //Set the AP's SSID  
char pass[] = "Password";     //Set the AP's password  
char channel[] = "1";         //Set the AP's channel  
int status = WL_IDLE_STATUS;     // the Wifi radio's status  
  
void setup() {  
  //Initialize serial and wait for port to open:  
  Serial.begin(9600);  
  while (!Serial) {  
    ; // wait for serial port to connect. Needed for native USB port only  
  }  
  // check for the presence of the shield:  
  if (WiFi.status() == WL_NO_SHIELD) {  
    Serial.println("WiFi shield not present");  
    while (true);  
  }  
  String fv = WiFi.firmwareVersion();  
  if (fv != "1.1.0") {  
    Serial.println("Please upgrade the firmware");  
  }  
  
  // attempt to start AP:  
  while (status != WL_CONNECTED) {  
    Serial.print("Attempting to start AP with SSID: ");  
    Serial.println(ssid);  
    status = WiFi.apbegin(ssid, pass, channel);  
    delay(10000);  
  }  
  
  //AP MODE already started:  
  Serial.println("AP mode already started");  
  Serial.println();  
  printWifiData();  
  printCurrentNet();  
}  
  
void loop() {  
  // check the network connection once every 10 seconds:  
  delay(10000);  
  printCurrentNet();  
}  
  
void printWifiData() {  
  // print your WiFi shield's IP address:  
  IPAddress ip = WiFi.localIP();  
  Serial.print("IP Address: ");  
  Serial.println(ip);  
  
  // print your subnet mask:  
  IPAddress subnet = WiFi.subnetMask();  
  Serial.print("NetMask: ");  
  Serial.println(subnet);  
  
  // print your gateway address:  
  IPAddress gateway = WiFi.gatewayIP();  
  Serial.print("Gateway: ");  
  Serial.println(gateway);  
  Serial.println();  
}  
  
void printCurrentNet() {  
  // print the SSID of the AP:  
  Serial.print("SSID: ");  
  Serial.println(WiFi.SSID());  
  
  // print the MAC address of AP:  
  byte bssid[6];  
  WiFi.BSSID(bssid);  
  Serial.print("BSSID: ");  
  Serial.print(bssid[0], HEX);  
  Serial.print(":");  
  Serial.print(bssid[1], HEX);  
  Serial.print(":");  
  Serial.print(bssid[2], HEX);  
  Serial.print(":");  
  Serial.print(bssid[3], HEX);  
  Serial.print(":");  
  Serial.print(bssid[4], HEX);  
  Serial.print(":");  
  Serial.println(bssid[5], HEX);  
  // print the encryption type:  
  byte encryption = WiFi.encryptionType();  
  Serial.print("Encryption Type:");  
  Serial.println(encryption, HEX);  
  Serial.println();  
}  

Notes and Warnings
NA
 

WiFiClass::disablePowerSave

Description
Disable power-saving mode

Syntax
int WiFiClass::disablePowerSave(void)

Parameters
The function requires no input parameter.

Returns
1 if disable success, 0 if failed

Example Code
NA

Notes and Warnings
NA
 

請先確認已安裝QQ通訊軟體